See what our Experts say about this Rhino Rack Roof Rack

• Availability of Longer than 65 inch Rhino Rack Heavy Duty Roof Rack for ARE Camper Shell with Tracks
  Hey Jeff, yes 65 inches is the max length of HD crossbar for the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT that you referenced but we do have a solution with the 78 inch HD bars part # RRRB2000S-2 and the feet kit part # RLTP-2 and you'd have a 78 inch crossbar setup that fits your current ARE tracks.
  view full answer...
• Will the Rhino-Rack RLTP Legs Fit on My Retrax XR Cover on My 2018 Ford F-150?
  I have a great solution for a rack that works with the rails on your Retrax XR tonneau cover on your 2018 Ford F-150. Unfortunately, the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall # RLTP-2 will not fit the Retrax XR rails. However, Rhino-Rack does make legs that are designed to fit the Retrax XR rails. Those are the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks # RRRLT600. Sadly, with these legs, you will not...
  view full answer...
• Roof Rack for Winnebago Travato Class B Motorhome on 2017 Ram Promaster Chassis
  The Thule TracRac TracVan # TH29613XT roof rack is designed to work with 2 pairs of the existing roof rack mounts on a Ram ProMaster. If your Winnebago Travato has those existing connection points on the roof, the TracVan ES roof rack would work perfectly for you. I've linked to a diagram showing what the mounts look like, and where they can be found on the roof. From the online photos I've seen, it appears the exterior of the ProMaster is unchanged from the cargo model, so it's very likely...
  view full answer...
  
• Roof Rack System for ATC Truck Bed Caps
  According to my research, the ATC truck bed caps used Rhino-Rack RTC-Style Roof Rack Tracks like part # RTC16. Therefore, I recommend taking a look at the Heavy-Duty Crossbar System part # RLTP-2 and part # RB1500B-2. The heavy-duty cross bars have a 220 lb weight capacity which is far superior to other rooftop mounted crossbars. However, the increased weight capacity means the crossbar is physically bigger which limits the amount of available accessories that can be attached to them.
  view full answer...
  
• Compatibility of Rhino-Rack Pioneer Platform on Pace Edwards Ultragroove Tonneau Covers
  The Pace Edwards UltraGroove Metal Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KMTA10A38 and the Pace Edwards UltraGroove Hard Tonneau Cover - Retractable - Aluminum - Matte Black # 311-KRTA10A38 will allow you to install a Rhino-Rack system. I recommend the Track Mount RLCP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 # RLTP-2 along with the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Black - 71" Long - Qty 2 # RB1800B-2. Then you can...
  view full answer...
• How To Install Rhino-Rack Pioneer Platform Rack on a 2010 Chevy Tahoe Hybrid
  In order to use the Rhino-Rack Pioneer Platform Rack on a 2010 Chevrolet Tahoe Hybrid you'd need to install a track system which I have listed for you below. Rhino-Rack RTC-Style Roof Rack Tracks part # RTC14 Rhino-Rack Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks part # RLTP-2 Rhino-Rack Quick Mount Leg Spacers part # RRQMPS10-4 Rhino-Rack Pioneer Platform Roof Tray part # RR42TB The tracks system will conform to the shape of the roof so there will be no issues...
  view full answer...
• Crossbar Recommendation for Factory Tracks Spaced 96" Apart on Lance 850 Camper
  It sounds like you have factory tracks on your Lance 850 camper. While you are correct that those quick mount legs # RRRLT600 or the # RLTP-2 fit the tracks, we do not have any long enough crossbars to accommodate tracks that are 96" apart. the only other solution is to purchase new tracks to mount between the ones you currently have or to remove the ones you have and bring them closer together. For the solution for purchasing all new tracks with the crossbars, I recommend the Rhino-Rack...
  view full answer...
• Roof Rack Recommendation for a 2007 Chevy Trailblazer for Carrying Ladders
  I would recommend going with the Rhino Rack HD crossbar roof rack as it will have plenty of strength for your ladders. You would need the part numbers # RB1250B-2, # RLTP-2, and # RRVA-FK2-2 which have been confirmed as a fit for your 2007 Chevy Trailblazer raised side rails.. For load stops for the ladders you would then want the part # RRRLH. For 10 foot cinch straps you could also use the part # RTD3. Be sure not to exceed the roof weight capacity of your vehicle.
  view full answer...
• What Accessories Are Designed to Fit the Rhino Rack Roof Rack Tracks # RRRTV188
  The Rhino Rack tracks part # RRRTV188 that you referenced was designed to have Rhino Rack roof racks installed in them like with the part numbers # RLTP-2 for feet and then part # RB1375S for a single HD crossbar.
  view full answer...
• Roof Rack and Cargo Box with Largest Capacity for a 2014 Honda Odyssey
  For your 2014 Honda Odyssey, if it has the factory side rails I recommend the Thule AeroBlade Edge # TH7503-TH7504. This is an aerodynamic roof rack that is quiet and has lower drag than square or round bar systems. It is also made of aluminum so it is light weight and corrosion resistant. It is also available in black, # TH7503B-TH7504B. Or for a more budget-friendly option I recommend the Inno square bar roof rack # INB137 for the bars and # INFR for the feet. If the van does not have...
  view full answer...
• Recommended Roof Rack And Kayak Carrier For 2011 Honda Odyssey With Naked Roof
  I have attached a link to all of the roof racks we offer that are designed to fit the roof of your 2011 Odyssey. Each of these roof racks require drilling into the roof of the vehicle so tracks can be mounted. I recommend the Rhino-Rack Vortex Roof Rack for your Odyssey. This roof rack has aerodynamic silver crossbars that help reduce wind drag and noise. The roof rack has a 165-lb weight capacity which can handle your 104-lb kayak. To order this roof rack you need part # RRVA137B-2,...
  view full answer...
• Installing 60" x 56" Rhino-Rack Pioneer Platform with Legs on a 2019 Silverado 1500 Crew Cab
  While we do have an option for you, the correct platform and backbone that is engineered to fit your 2019 Silverado 1500 Crew Cab is the # RR28ZW. The 42113B is unfortunately not confirmed to fit. With that being said, without using the Backbone, the only way to install just the platform # RR72TB with legs is with drilling a track system directly onto your cab. For this route, you need the following parts: - Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 - Track Mount RLTP Legs for Rhino-Rack...
  view full answer...
• Parts Needed To Install The Rhino-Rack Sunseeker Awning On A Rhino-Rack RTC Roof Rack Track
  I spoke with Rhino-Rack and their tech stated they only recommend installing the Rhino-Rack Sunseeker Awning # RR32132 into a crossbar and have not tested it in the c-channel of the Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 # RTC16 as they are slightly larger than their crossbar c-channels. For this I recommend the Track Mount RLTP Legs # RLTP-2 and the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 71" Long - Qty 2 # RRVA180B-2. The # RLTP-2 legs...
  view full answer...
• How To Mount Rhino Rack Heavy Duty Cross Bars On A 2002 VW Eurovan
  There is not a compatible foot to mount the Rhino Rack heavy duty bars to your 2002 VW Eurovan. Since it is a naked roof you would have to mount a channel mount Rhino-Rack RTC-Style Roof Rack Tracks - Channel Mount - 63" Long - Qty 2 Item # RTC16 to the roof and use the Track Mount RLTP Legs for Rhino-Rack RTC- and RT-Style Roof Rack Tracks - 2" Tall - Qty 4 Item # RLTP-2 to mount your heavy duty bars. Installing the tracks do require drilling holes into the roof for the hardware.
  view full answer...
• What Length Rhino Rack Roof Rack Crossbars Fit 2006 Jeep Wrangler
  Thank you for noting the different roof rack fit information between our site and the Rhino-Rack site. I checked with my technical contact at Rhino-Rack and it was confirmed that you are in fact correct - 59-inch crossbars are indeed specified for your 2006 Wrangler. We will be updating our fit information - thanks again for your keen eye. The 49-inch Vortex bar rack we specify - consisting of parts # RRVA126B-2, # RLTP-2 and # RTC12JW - does fit your Wrangler but the 59-inch Vortex bars...
  view full answer...
• Is the Rhino Rack RRRTS530 Track System a Fit on 2008 Saturn Aura
  The Rhino-Rack RT-Style Roof Rack Tracks # RRRTS530 are a universal track system that can be mounted on any vehicle with a naked roof. These tracks are 43-5/16" long, so you'll want to make sure that you have at least that much space length-wise on the roof of your 2008 Saturn Aura in order to make sure they'll fit. These tracks are compatible with the # RLTP-2 , # RLTF , # RLT500-2 and # RRRLT600 Rhino Rack foot packs. You will also need cross bars to complete your roof rack kit. If you...
  view full answer...
• Will Rooftop Bike Carrier, # S64720, Fit on a 1998 Ford Expedition
  The Rooftop Bike Carrier, # S64720, will fit on Thule, Yakima, and most factory roof rack load bars that run side to side on the top of the vehicle. If you do not have a factory roof rack you can add a roof rack system to your 1998 Ford Expedition if it is an EL model and has side rails that run front to back. You can use the Rhino-Rack roof rack, # RRVA118S-2 and # RRSX100. If it is not an EL model and has factory tracks that run front to back, use # RB1375, and leg set # RLTP-2. With...
  view full answer...

Do you have a question about this Roof Rack?